Vinil Fibra de Carbón

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest


7 Años Durabilidad

Adhesivo Libre de Burbujas (3 en 1)
5.6 milésimas (140 micrones)
Flexible, Formable
Disponible en Negro, Blanco, Plata
Imprimible Digital




Carbon Fiber Film – Repositionable Permanent AdhesiveDownload Bulletin

Summary: Dragon Wrap™ Carbon Fiber Film is a 5.6 mil calendered vinyl film featuring a clear repositionable permanent acrylic adhesive on an air-egress liner. This film has excellent dimensional stability, outstanding durability and outdoor performance. This repositionable permanent adhesive offers minimal initial bond growing to permanent bonds that facilitates application of large graphics. The air egress liner also aids in large graphic application.
Applications: Common uses are Automotive Accent Restyling and Automotive Wraps as applied by experienced installers. Architectural Signage, Flexible Sign Surfaces, and Outdoor Advertising are other possibilities.
Film Thickness: 5.6 mils.
(Thickness variance +/- 10%)
Adhesive Thickness Side One: 1.1 to 1.3 mils.
(Thickness variance +/- 10%)
Liner Thickness Side One: 7.0 mils.
(Thickness variance +/- 10%)
Temperature Ranges: Minimum application temperature +40° F
Service temperature range -40°F to +200°F.
Dimensional Stability: Good.
Expected Exterior Exposure: Up to 5 years. Performance can vary depending on UV exposure.
Adhesion: To stainless steel 40 oz/in.
When tested according to PSTC-101 Method A with 24 hr. dwell at 70°F and
50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
Water Resistance: Excellent. Test if immersed.
Humidity Resistance: Excellent.
Solvent Resistance: Excellent
Storage Stability: 1-year shelf life when stored at 70°F and 50% relative humidity.
Product Codes: 780-30U 30”x150’
780-60U 60”x150’
Recommendations: Concept Carbon Fiber film should be maintained to preserve long term appearance using standard aftercare products designed for textured exterior vinyl surfaces. A commercially available protectant such as Armor All or 303 Aerospace Protectant is recommended. DO NOT use waxes of any type.